Welcome to Indelox
Healthcare Division
Indelox Healthcare was promoted with a vision to make Critical Care available to people at affordable costs. Indelox is Exclusive Importer, Distributor and Service Provider of Critical Care Range Of products. We are also catering to customized requirements of ICU/ICCU/ITU/HDU with our Critical and Home Care Range Of products.
What we do
Our goal is to stay focused on Point-of-care testing to take care of critical patients. In the intensive care unit (ICU), rapid changes in a patient’s condition often necessitate biochemical monitoring with diagnostic laboratory tests and a Rapid Response. The term point-of-care (POC) testing, also called near-patient testing or bedside testing, refers to the performance of diagnostic tests at the patient point. Traditionally, these tests were performed in the central laboratory. With POC testing, these tests are performed outside of the confines of the clinical laboratories of health care facilities.
In hospitals, they primarily are performed in areas with the most urgent need for rapid diagnosis and therapy, such as emergency departments, surgical suites, critical care units, and certain outpatient areas. With further advancement in technology, POC testing is a dynamic work in progress; the analysers have become Light Weight, faster, portable and more user-friendly and have been demonstrated to achieve accuracy with a simple yet Reliable and Authenticated Test Process Resulting In Superfast Treatment Turn Around Time.
Fully Automatic Blood Gas & Chemistry Analyzer
Fully Portable Point-of-Care Testing Solution Fully Automatic Blood Gas & Chemistry Analyzer is a fully portable device based on the principle of Microfluidic and Micro Sensor Technology. The device is automated, compact and accurate. The test results are obtained every time after calibration within two minutes with the help of disposable cartridge for FDA approved results.
Fully Automatic Blood Gas & Chemistry Analyzer measures ABG, Electrolyte and Metabolite test functions with speed and accuracy due to Auto-Sample Aspiration and auto Self-Simulation For FDA Approved Test Results With up to 35 Parameters.
Read More
Features
Rapid
- Fully Automated – Auto Sample Aspiration
- Test Time – Less than 2 minutes
- Built in printer for results
Reliable
- Principle: Innovative microfluidic and micro sensor technology
- Parameters Measured: pH, pO2, pCO2, Na, K, Ca, Cl, Glu, Lac, Hct
- Sample types: Arterial, Venous, Capillary, Mixed, CPB, Aqueous
- Triple Result Guarantee: Ensured with Calibrator, Control and Electronic simulator
- 12 Months Cartridge Shelf life
Convenient
- Micro sample – 140 µl
- Zero maintenance
Test Panels
Blood Gas & Chemistry Analyzer
| pH | pCO2 | pO2 | NA+ | K+ | CI | Ca++ | Hct | Glu | Lac | |
|---|---|---|---|---|---|---|---|---|---|---|
| BG3 | • | • | • | |||||||
| BG8 | • | • | • | • | • | • | • | • | ||
| BG4 | • | • | • | • | ||||||
| BG9 | • | • | • | • | • | • | • | • | • | |
| BG10 | • | • | • | • | • | • | • | • | • | • |
| BG4 | • | • | • | • | • |
Calculated values: cH+, HCO3-act, HCO3-std, BE(ecf), BE(B), BB(B), ctCO2, sO2(est), Ca++(7.4), AnGap, tHb(est), pO2(A-a), pO2(a/A), RI, pO2/FIO2, cH+(T), pH(T), pCO2(T), pO2(T), pO2(A-a)(T), pO2(a/A)(T), RI(T), pO2(T)/FIO2 , mOsm
Controls
Fully Automatic Blood Gas & Chemistry Analyzer
Level 1, Level 2 and Level 3 controls are available for quality control check
Air Turning Mattress Functions and Specifications
Motor Supply Voltage : 230V 50Hz
Weight : 1.60 kgs
Pump size : 27*15*9.5 cm
Pump model : 2 or 3way
Output : 4 L ± 10 %
Pressure Range : 40-100 mmHg
Read More
Function
- With On/Off switch
- With “S” Quick Connector or fill in air pipe
- Could be replace Fuse, filter
- Dual metal Hook Hanger
- With adjustable pressure control(with Kg data)
- With Low Pressure indicator
Dimension : 190*80*10 cm
Weight : 3.82 kgs
Cell height / quantity : 4″ / 18cells
Maximum patient weight : 200 kgs
Cell material : Nylon Tpu
Cover material : light blue breathable stretch PU
Base cover material : PVC
CPR : CPR tag
Features / Function
- Bed sore prevention
- Skin massage
- Enhance blood circulation
- Cover: Anti-friction, low shear
- Cover: Breathable, two directional Stretch Cover
- Advanced cube cells for enhanced comfort
- 6 cells with Low Air Loss
- Zipper-All-Around Cover
- CPR Valves / straps
- Have a cool high permeability
- Reduce moisture and heat accumulation.
- Good ductility, high durability
- No deformation of the characteristics
- Minimal operating and ambient noise
- Quick Connector: Provides a firm surface that makes it easier for the patient to transfer or power failure.
Transcutaneous Jaundice Detector
You can see the veins on the top side of hand.
BATTERY
- Use 18650, 3.7V 1200mAh Lithium Polymer Batteries Only.
- Use 5V, 200mAh chargers only to charge the device.
- Device should be charged for an hour before first use.
- Charging Time: 1 hr & Standby Time: 8 hrs.
SAFTY MEASURES
- The instrument is not allowed to disassemble or repair in any way.
- Keep it out of children and avoid using by any irrelevant personnel.
- Avoid staring at the light directly.
- If not used for long time, please remove the battery to avoid battery corrosion.
Read More
MBJ20 is a handhold instrument used in the dynamic clinical examination of neonate jaundice. The transcutaneous concentration of bilirubin correlative with serum bilirubin concentration can be determined instantly and non-invasively since the detector is placed on the neonatal skin. This prevents the neonates from any discomfort typically associated with abstraction of blood samples, reduces costs since test results are immediate, and increases the working efficiency of doctors and nurses.
- MBJ20 Transcutaneous Jaundice Detector is developed with advanced electronics and optics, adopting Fiber Optics, spectrum splitter, controlled spectrum filter, NFM switching, and information processing techniques.
- Accurate test, instant and safe test
- LCD display for convenient observation
- Streamline design, smart and delicate, comfortable to hold.
- Long service life, low energy consumption.
- Battery indicator clews battery power information and timely prompts battery replacement.
- Instant test result reading, providing serum bilirubin concentration.
- Storage and memory function.
- Browse and delete function.
- Convenient self calibration.
- Easy to operate and maintenance.
- Mean value computation.
Paediatric Vein finder
You can see the veins on the top side of hand.
INTRODUCTION
Pediatric or Baby or Infant Vein Finder is a Portable Best in Class device used to identify Hand Veins in new born, neonatal and Pediatric patients. The device comes with Class I transilluminators, that will trans-illuminate veins and make them visible to ordinary eyes for IV, blood collection etc.
Read More
FEATURES
- Long Lasting Battery
- Portable & Handheld
- Innovative Design
- Dual Mode
- Pedi-Safe
- Safe & Secure
- Patent Technology
USE & HANDLING
- Keep the UR-Trans illuminator light head under the child’s palm.
- The device should be in contact with the palm without any gap.
- Switch on the device.
- For the clear vision of vein, two modes of light is provided which is controlled by the same switch.
- The powerful Trans-illuminator clearly illuminate the vein.
- You can see the veins on the top side of hand.
BATTERY
- Use 18650, 3.7V 1200mAh Lithium Polymer Batteries Only.
- Use 5V, 200mAh chargers only to charge the device.
- Device should be charged for an hour before first use.
- Charging Time: 1 hr & Standby Time: 8 hrs.
SAFTY MEASURES
- The instrument is not allowed to disassemble or repair in any way.
- Keep it out of children and avoid using by any irrelevant personnel.
- Avoid staring at the light directly.
- If not used for long time, please remove the battery to avoid battery corrosion.
